ASA 5505 CISCO SET PASSWORD HOW TO
ASA 5505 CISCO SET PASSWORD PC

Restrict flow to Outside (had to do this for licensing reasons) PS: I wasn't sure if this was a better fit here or on SF.

Policy-map type inspect dns preset_dns_mapР”Р„sdm location LAN-network 255.255.255.0 insideР”Р„sdm location WIRELESS-network 255.255.255.0 insideР”Р„sdm location RANDD-network 255.255.255.0 insideР”Р„sdm location CNC-network 255.255.255.0 insideР”Р„sdm location LEGACY-network 255.255.255.0 insideР”Р„sdm location InternalGateway 255.255.255.255 insideР”Р„sdm location DCServer 255.255.255.255 insideР”Р„sdm location MUVS-TP 255.255.255.255 inside No threat-detection statistics tcp-intercept Snmp-server enable traps snmp authentication linkup linkdown coldstartР”В¬rypto ipsec security-association lifetime seconds 28800Р”В¬rypto ipsec security-association lifetime kilobytes 4608000 Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absoluteР”Вynamic-access-policy-record DfltAccessPolicy Route inside LEGACY-network 255.255.255.0 InternalGateway 1 Static (inside,outside) tcp interface lpd MUVS-TP lpd netmask 255.255.255.255Р”Р„ccess-group outside_access_in in interface outside Static (inside,outside) tcp interface https DCServer https netmask 255.255.255.255

Static (inside,outside) tcp interface smtp DCServer smtp netmask 255.255.255.255 Icmp unreachable rate-limit 1 burst-size 1 Same-security-traffic permit intra-interfaceР”Р„ccess-list outside_access_in remark Email accessР”Р„ccess-list outside_access_in extended permit tcp any LEGACY-network 255.255.255.0 eq smtpР”Р„ccess-list outside_access_in remark ActiveSync Email AccessР”Р„ccess-list outside_access_in extended permit tcp any LEGACY-network 255.255.255.0 eq httpsР”Р„ccess-list outside_access_in remark Pronto Trueform PrintingР”Р„ccess-list outside_access_in extended permit tcp any LEGACY-network 255.255.255.0 eq lpd Name 192.168.1.214 MUVS-TP description Trueform Print Server Any help or suggestions would be very much appreciated.Р”В®dit: See below the running config, with some redactions.

ASA 5505 CISCO SET PASSWORD HOW TO

I believe that the issue here is that I need to add some static routes to show the path from insideoutside, but I just do not grok them well enough to know how to structure them.

ASA 5505 CISCO SET PASSWORD PC

If I connect the same PC directly to the router and assign it the public IP address directly I can access the internet no problem. Using this PC I can ping 192.168.1.3 but no further - I cannot ping the public IP address or 8.8.8.8. With the internet-facing router connected to port 0, I connect a computer to port 1 with IP 192.168.1.20, Mask 255.255.255.0 and gateway 192.168.1.3. I have an access rule on the firewall that allows IP traffic from any source on the inside network to any less secure network (there is one for both IPv4 and 6). Right now our internal network is on 192.168.1.0/24, and the public IP we have from the ISP is in the 125.x.x.x range. I am trying to set up a Cisco ASA 5505 to be connected with a public IP address on one interface, and to have the second interface connect to our internal network.

There is something about routing especially that I just haven't had that 'Oh I get it' moment yet, so it's likely this is a very basic misconfiguration. I'll start by pointig out that networking issues have always left me scratching my head.

Asa 5505 cisco set password